KUMPANTER-SMALL ZIRCONIUM-TI U23-2009

G10 handle with D2 Blade

Orders are shipped via USPS or UPS at a flat shipping.

For US order over than $100 with free shipping, less than $100 shipping cost $3.

For other countries order shipping cost $15.

If the order is urgently needed to be shipped via DHL or UPS or the like, or the region(s) you are located in postal service can't reach, please contact us for a shipping rate. (Email address: support@nuknives.com)

*If the item you ordered is out of stock at the warehouse, please allow us to take one week or so to get it restocked and ship it to you ASAP. 

*Orders ship by post will takes approx 3~30 days to arrive.

*****We feel that you will love our products. However, if you are not completely satisfied with your purchase from our website, you may return your item(s) within 30 days of receipt for replacement or refund.The items being returned must have been purchased directly through the official website., after we got your returns and we will refund to you directly.

Overall Length: 176mm/ 6.929”
Blade Length: 76mm/ 2.99”
Blade Thickness: 3mm/ 0.118”
Handle Length: 100mm/ 3.937”
Handle width: 28mm/ 1.102”
Handle Thickness: 12mm/ 0.472”
Diameter of tail hole: 5mm/ 0.197”
Distance of bottom holes: 9mm/ 0.354”
Closed Dimension: L100*W28*T12 mm/L3.937*W1.102*T0.472 inch
Overall Dimension: L176*W28*T12 mm/L6.929*W1.102*T0.472 inch
Packing Dimension: L142mm*H86mm
Weight: 94g/3.315oz 
118.5g/ 4.18oz (with pouch packing)

INSTRUCTIONS BEFORE USE

All knives leaving our workshop are extremely sharp, so you have to treated with due care. 

Make sure when you open the knife, the spine of the knife is pressing against the palm of your hand and the blade is on the opposite side with nothing in front of it. 

Never touch the cutting edge with fingers or other bodyparts. 

Make sure the knife is in the closed/locked position when carrying or transporting the knife.

MAINTENANCE

TIGHTEN: Tighten screws as needed. Ensure that the wrench is seated properly to avoid stripping the screws.

SHARPEN: Sharpen the convex blade edge at 18º-20º using ceramic stones, professional systems, leather strops, or similar.

CLEAN: Wipe the blade clean with a soft cloth, rinse it with fresh warm water after contact with a corrosive medium such as blood or salt, and allow it to dry completely. Should the action before sticky, disassemble the knife, wipe each part clean, then re-lubricate the pivot with a small drop of Fluorinated Grease and coat the blade with high quality gun oil or WD-40.

STORE

Before storing it, always clean your knife thoroughly and make sure it is completely dry, store in a dry place with the provided pouch.

WARRANTY

The knife is guaranteed against defects in material and workmanship, please contact us if there is a problem or any questions. support@nuknives.com